Description
Ventis HE350 Zero Clearance Wood Fireplace is an elegant, high-performance fireplace. It burns up to 10 hours and holds up to 60 pounds of hardwood, the firebox can hold up to 25-Inches of log. The fireplace uses an automated air intake system that allows the fire to reach the perfect temperature before going into slow burn mode. Two giant double glass doors provide an impressive viewing area, making it the centerpiece of any room.
-
Designed mainly for heating large spaces
-
Patented design of the intelligent air control mechanism
-
Luxurious effect created by an eye-catching fireplace
-
Large glass surface
-
EPA 2020 certified
- Non-catalytic combustion technology
-
Installation authorized on the Island of Montreal
-
Firestop made of high density insulation board
-
176 CFM blower included
-
8" Ventis stainless steel anchor plate included
- Fresh air intake adapter included
Appliance Performance
| Fuel type | Dry cordwood (16" recommended) |
| Recommended heating area | 1,000 - 2,800 ft² |
| Overall firebox volume | 4.28 ft³ |
| EPA loading volume | 4.28 ft³ |
| Maximum burn time | 11 Hours |
| Maximum heat output-dry cordwood | 95,000 BTU/h |
| Minimum overall heat output rate | 16,900 BTU/h (5.0 kW) |
| Maximum overall heat output rate | 43,000 BTU/h (12.6 kW) |
| Average efficiency-dry cordwood (HHV) | 64 % |
| Average efficiency-dry cordwood (LHV) | 69 % |
| Optimum efficiency | 70 % |
| Optimum heat transfer efficiency | 69 % |
| Average particulate emission rate | 1.6 g/h |
| Average CO | 159.0 g/h |
- Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
- Optimum overall efficiency at a specific burn rate (LHV).
- This appliance is officially tested and certified by an independent agency.
- The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
- As measured per CSA B415.1-10 stack loss method.
- Higher Heating Value of the fuel.
- Lower Heating Value of the fuel.
- The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
- Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
- Carbon monoxyde.
General Features
| Premium quality blower included (CFM) | 176 CFM included |
| Certified according to applicable standards | CAN/USA accredited laboratory |
| Combustion technology | Non-catalytic |
| Stainless-steel secondary-air system | Yes |
| Flue outlet diameter | 8" |
| Recommended chimney diameter | 8" |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height | 15" |
| Overall dimension (Width) | 45 1/4" |
| Overall dimension (Height) | 43 3/8" |
| Overall dimension (Depth) | 31 3/4" |
| Door type | Double, glass with cast iron frame |
| Door opening size (Width) | 33" |
| Door opening size (Height) | 12 3/4" |
| Glass type | Ceramic glass |
| Glass surface - W x H | 29 3/4" x 13 1/2" |
| Firebox size (Width) | 25 3/8" |
| Firebox size (Height) | 25 3/8" |
| Firebox size (Depth) | 17 7/8" |
| Maximum log length | 25" |
| Log positioning | Loading over width |
| Baffle type | High density insulation board |
| High-efficiency certified appliance | Yes, EPA 2020 certified |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA Standard (emissions) | EPA / ASTM WK47329 |
| Canadian Standard (safety) | ULC S610 |
| USA Standard (safety) | UL 127 |
| Shipping weight | 555 lb (252 kg) |
OPTIONS & ACCESSORIES
|
|
Traditional Style Faceplate (VBA1540)
|
|
|
Classic Moulded Refractory Brick Panels (AC02360)
|
|
|
5-Inch Fresh Air Intake Register with Airtight Damper
|
|
|
Modern Style Warm Air Circulation Grille
|
|
|
Fireplace Carrying Handle Kit
|
|
|
Forced Air Kit
|
Warranty
- Limited lifetime warranty.
Downloads
- Download Product Catalogue
- Download Appliance Dimensions
- Download Installation and Operation Manual
- Fresh Air Intake Adapter Installation Instructions
Why Shop At Live The Finest?
FREE SHIPPING + NO SALES TAX (EXCLUDES TEXAS) ON MOST ORDERS OVER $999!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.